SESK: Stuff Everyone Should Know · sesk.info/ham-rf-compliance-methods
Which methods can determine compliance with FCC RF exposure rules?
Use OET Bulletin 65 calculations, computer modeling, or calibrated measurements.
- Only an SWR reading
- Only the transmitter manual
- Calculations, modeling, or calibrated measurements ✔
Why: Compliance may be evaluated using accepted calculations, computer models, or measured field strength. The measurement method requires calibrated equipment.
Huh, didn't know that: Different station layouts may make one evaluation method more practical than another.
The station modeled good behavior before measuring it.
Like this card?
References
Answer: Calculations, modeling, or calibrated measurements. Compliance may be evaluated using accepted calculations, computer models, or measured field strength. The measurement method requires calibrated equipment.
- NCVEC 2026-2030 Technician Question Pool, T0C06 www.ncvec.org/downloads/2026-2030%20Technician%20Pool%20and%20Syllabus%20Public%20Release%20Feb%2019%202026.pdf
By calculation based on FCC OET Bulletin 65
Checked 2026-10-09. - NCVEC 2026-2030 Technician Question Pool, T0C06 www.ncvec.org/downloads/2026-2030%20Technician%20Pool%20and%20Syllabus%20Public%20Release%20Feb%2019%202026.pdf
By calculation based on computer modeling
Checked 2026-10-09. - NCVEC 2026-2030 Technician Question Pool, T0C06 www.ncvec.org/downloads/2026-2030%20Technician%20Pool%20and%20Syllabus%20Public%20Release%20Feb%2019%202026.pdf
By measurement of field strength using calibrated equipment
Checked 2026-10-09.
Think this answer is wrong? Tap "Challenge this answer" on the card in the game and tell us why.
More stuff everyone should know
That's stuff everyone should know.