SESK: Stuff Everyone Should Know · sesk.info/hame-60m-bandwidth
What is the maximum bandwidth an emission may occupy on the 60 m band?
2.8 kHz for all 60 m spectrum.
- 500 Hz
- 6 kHz
- 2.8 kHz ✔
Why: Rule 97.303(h) says amateur emissions on 60 m may not occupy more than 2.8 kHz. That is about the width of one SSB voice signal or a typical digital mode.
Huh, didn't know that: Power on the four 60 m channels is limited to 100 W ERP, and to 9.15 W ERP in the 5351.5 to 5366.5 kHz segment.
Your parrot squawks, "CQ, CQ, DE Polly!"
Like this card?
References
Answer: 2.8 kHz. Rule 97.303(h) says amateur emissions on 60 m may not occupy more than 2.8 kHz. That is about the width of one SSB voice signal or a typical digital mode.
- 47 CFR 97.303 Frequency sharing requirements (Cornell LII mirror of eCFR) www.law.cornell.edu/cfr/text/47/97.303
emissions do not occupy more than 2.8 kHz
Checked 2026-10-11. - 47 CFR 97.303 Frequency sharing requirements (Cornell LII mirror of eCFR) www.law.cornell.edu/cfr/text/47/97.303
the carrier frequency is set to the center frequency
Checked 2026-10-11. - 47 CFR 97.313 Transmitter power standards (Cornell LII mirror of eCFR) www.law.cornell.edu/cfr/text/47/97.313
radiated power exceeding 9.15 W ERP
Checked 2026-10-11.
Think this answer is wrong? Tap "Challenge this answer" on the card in the game and tell us why.
More stuff everyone should know
That's stuff everyone should know.