SESKStuff Everyone Should Know
SESK: Stuff Everyone Should Know · sesk.info/osha-walking-4ft-trigger

In general industry what height requires fall protection?

4 feet triggers protection.

Start playing free

  1. 4 feet ✔
  2. 6 feet
  3. 10 feet

Why: OSHA sets the trigger height at 4 feet for walking-working surfaces in general industry. Construction uses 6 feet. Employers must protect workers from falls at or above that height.

Huh, didn't know that: The rule is 29 CFR 1910.28(b)(1), which covers unprotected sides and edges.

The dad joke
Why did the hard hat go to school? To get a little ahead.
Like this card?
Play the game

References

Answer: 4 feet. OSHA sets the trigger height at 4 feet for walking-working surfaces in general industry. Construction uses 6 feet. Employers must protect workers from falls at or above that height.

  1. 29 CFR 1910.28 - Duty to have fall protection www.ecfr.gov/current/title-29/subtitle-B/chapter-XVII/part-1910/subpart-D/section-1910.28
    unprotected side or edge that is 4 feet (1.2 m) or more above a lower level
    Checked 2026-10-10.

Think this answer is wrong? Tap "Challenge this answer" on the card in the game and tell us why.

Test yourself in the game

Safety & First AidIn general industry, what condition must workplaces, passageways and storerooms be kept in?Safety & First AidWhat is the standard height for guardrails in general industry?Safety & First AidA walking surface hazard can't be fixed right away. What must the employer do?

That's stuff everyone should know.