SESKStuff Everyone Should Know
SESK: Stuff Everyone Should Know · sesk.info/weld-tig-torch-angle

Miller suggests holding the TIG torch at about what angle?

70 to 80 degrees.

Start playing free

  1. 70 to 80 degrees ✔
  2. 20 to 30 degrees
  3. 45 degrees exactly

Why: A steep torch angle keeps the arc focused on the puddle. The tungsten should stay no more than 1/16 to 1/8 inch off the workpiece.

Huh, didn't know that: Miller says the filler rod rests at about 15 degrees from the workpiece.

The dad joke
What is the best way to pass a geometry test? Know all the angles.
Like this card?
Play the game

References

Answer: 70 to 80 degrees. A steep torch angle keeps the arc focused on the puddle. The tungsten should stay no more than 1/16 to 1/8 inch off the workpiece.

  1. Guide to TIG Welding Basics (Miller) www.millerwelds.com/en-US/resources/knowledge-hub/tig-welding/how-to/guide-to-tig-welding-basics
    Hold the TIG torch in your hand at a 70- or 80-degree angle.
    Checked 2026-10-10.

Think this answer is wrong? Tap "Challenge this answer" on the card in the game and tell us why.

Test yourself in the game

Trades & ShopWhich shielding gas works for all TIG applications, all metals and thicknesses?Trades & ShopWhen TIG welding steel, which polarity setting does Miller recommend?Trades & ShopWhat current type is used for TIG welding aluminum?

That's stuff everyone should know.